Cylindrical roller bearings with cage(fag bearings)
Single row cylindrical roller bearings with cage are units comprising solid inner and outer rings together with cylindrical roller and cage assemblies. The outer rings have rigid ribs on both sides or are without ribs, the inner rings have one or two rigid ribs or are designed without ribs. The cage prevents the cylindrical rollers coming into contact with each other during rolling.

The cylindrical roller bearings are very rigid, can support high radial loads and, due to the cage, are suitable for higher speeds than the full complement designs. Bearings with suffix E have a larger roller set and are thus designed for extremely high load carrying capacity.

The bearings can be taken apart and can therefore be fitted and dismantled more easily. Both bearing rings can therefore have an interference fit.

Single row cylindrical roller bearings with cage are available as non-locating, semi-locating and locating bearings.

Low-friction cylindrical roller bearings
Low-friction cylindrical roller bearings LSL and ZSL are single row, self-retaining and correspond to dimension series 23. The bearings have solid outer rings with two ribs, while the inner rings have one rib. The inner ring can be removed and this gives easier fitting of the bearings. Disc cages or spacers prevent the cylindrical rollers coming into contact with each other during rolling.

High precision cylindrical roller bearings
Cylindrical roller bearings of this type are double row precision bearings for machine tools. They allow radially rigid, high precision bearing arrangements and are mainly used for the radial support of main spindles.

The bearings comprise solid outer rings without ribs, solid inner rings with three ribs and cylindrical roller and cage assemblies with solid brass cages. For optimum setting of the radial internal clearance, the inner ring has a tapered bore with a taper of 1:12. The cylindrical roller bearings can be dismantled and are therefore easier to fit and remove. Both bearing rings can therefore have an interference fit.

Full complement cylindrical roller bearings(ina bearings)
Full complement cylindrical roller bearings have solid inner and outer rings and rib-guided cylindrical rollers. Since these bearings have the largest possible number of rolling elements, they have extremely high radial load carrying capacity, high rigidity and are suitable for particularly compact designs. Due to their kinematic conditions, however, they cannot achieve the high speeds that are possible when using cylindrical roller bearings with cage.

Full complement cylindrical roller bearings are available as non-locating, semi-locating and locating bearings and in single and double row designs.

Cylindrical roller bearings with snap ring grooves
Cylindrical roller bearings with snap ring grooves are full complement, self-retaining units comprising solid inner and outer rings, rib-guided cylindrical rollers and sealing rings.

The outer rings have grooves for retaining rings. The inner rings are axially split, 1 mm wider than the outer rings and are held together by a steel strip that is rolled into place.

Locating bearings

Cylindrical roller bearings with snap ring grooves are locating bearings. These bearings are highly rigid and can support axial forces in both directions as well as high radial forces.

Due to the full complement design of these bearings, they have the largest possible number of rolling elements and thus extremely high basic dynamic and static load ratings. Due to their kinematic conditions, however, they cannot achieve the high speeds that are possible when using cylindrical roller bearings with cage.

Bearings for cable sheaves

Due to the grooves in the outer ring, the bearing rings can be axially located with ease. The bearings are therefore very suitable in bearing arrangements for cable sheaves.

For more infomations please visit our website at www.perfectbearing.com , or you can contact us by mail or call.Looking forward to hearing from you. 

Skype/Wechat/Whatsapp:+86-18963592618

Email: perfectbearing@www.perfectbearing.com

Aligning needle roller bearings,Combined needle roller bearings and Inner rings. most of the ina needle roller bearings we can surply in stock .

Needle roller bearings with ribs

Needle roller bearings are single or double row units comprising machined outer rings with ribs, needle roller and cage assemblies and removable inner rings. The bearings are available in open and sealed versions.

Needle roller bearings without ribs

Needle roller bearings without ribs are single or double row units comprising machined outer rings without ribs, needle roller and cage assemblies and removable inner rings.

The bearings are not self-retaining. This means that the outer ring, needle roller and cage assembly and inner ring can be fitted independently of each other.

Aligning needle roller bearings

Aligning needle roller bearings are units comprising drawn outer cups, plastic support rings with a concave inner profile, outer rings with a spherical outside surface, needle roller and cage assemblies and removable inner rings.

The bearings can compensate static shaft misalignments and can thus tolerate misalignment of the shaft relative to the housing.

Aligning needle roller bearings are firmly seated in the housing bore. The bore can therefore be produced easily and economically.

Combined needle roller bearings

Combined needle roller bearings are units comprising radial needle roller bearings with a rolling bearing component capable of supporting axial loads.

Inner rings

Inner rings are made from hardened rolling bearing steel and have precision machined or ground raceways.

They are used where:

the shaft cannot be used as a raceway with needle roller and cage assemblies, drawn cup needle roller bearings with open ends, drawn cup needle roller bearings with closed end and needle roller bearings
needle roller bearings must be combined with wider inner rings in order to facilitate axial displacement of the shaft in relation to the housing
optimum running surfaces are required for the seal lips.

Inner rings, precision machined

In inner rings IR, the raceway is precision machined. Chamfers on the end faces allow easy insertion into the bearings and prevent damage to the seal lips of the bearings. The inner rings are available with and without a lubrication hole.

Inner rings, ground

In inner rings LR, the raceway is ground. The end faces are turned and the edges are broken. These rings have larger tolerances than the rings of series IR. They are therefore suitable for applications that permit larger tolerances for width and less demanding requirements for axial runout.

Skype/Wechat/Whatsapp:+86-18963592618

Email: perfectbearing@www.perfectbearing.com

China BRG bearing provide nearly all kinds of FAG bearings,if you want to know more infomations,please visit our website at www.perfectbearing.com ,or you can contact us by mail or cal.Looking forward to hearing from you soon.

Skype/Wechat/Whatsapp:+86-18963592618

Email:perfectbearing@www.perfectbearing.com

China BRG bearing is an authorized FAG bearing distributor in China. Today, FAG is one of the leading brands for applications in machine building, the automotive industry and in aviation and aerospace technology. The Schaeffler Group’s FAG brand has companies, subsidiaries and sales agencies in all major industrial countries.

Since 2001, FAG has been part of the Schaeffler Group and has been active in all of the group’s divisions – Aerospace, Automotive and Industrial. Together with INA’s complementary product range, FAG has one of the widest product portfolios in the rolling bearing industry, covering nearly all applications in production machinery, power transmission and rail technology, heavy industry and consumer products.

FAG ball bearings and roller bearings are manufactured as standard and special bearings in many designs and sizes with diameters ranging from 3 millimeters to 4.25 meters. Together with INA bearing , FAG offers customers comprehensive support and services for the diagnosis, maintenance and mounting of rolling bearings and complete systems.

As a forward-looking company, the Schaeffler Group with its brand FAG has invested significant amounts in research and development. Modern simulation methods and testing facilities as well as special materials engineering laboratories ensure the continuous development and improvement of all product lines and confirm the innovative force of FAG.

Our objective is to exceed our customer’s expectations by providing quality products and improving the services.

Skype/Wechat/Whatsapp:+86-18963592618

Email:perfectbearing@www.perfectbearing.com

FAG SKF Full complement cylindrical roller bearings consist of Single row full complement cylindrical roller bearings and Double row full complement cylindrical roller bearings.

SKF  Single row full complement cylindrical roller bearings

NCF design bearings have two integral flanges on the inner ring and one integral flange on the outer ring and can thus support axial loads acting in one direction and provide axial shaft location in one direction. A retaining ring at the flangeless side of the outer ring holds the bearing assembly together. The axial internal clearance in the bearing is provided in the product table and is designed to permit small axial displacements of the shaft in relation to the housing, e.g. as a result of thermal expansion of the shaft, to be accommodated in the bearing.

NJG design bearings comprise the heavy dimension series 23 and are intended for very heavily loaded, slow speed applications. These bearings have two integral flanges on the outer ring and one integral flange on the inner ring and can thus support axial loads acting in one direction and provide axial shaft location in one direction. In contrast to the other full complement bearing designs, NJG design bearings have a self-retaining roller complement. The outer ring with its two integral flanges together with the roller complement can therefore be withdrawn from the inner ring, without having to take any precautions to prevent the rollers from falling out .

FAG Single row full complement cylindrical roller bearings include series of  SL1818  SL1822  SL1829  SL1830  SL1850  SL1923.

SKF Double row full complement cylindrical roller bearings

NNCL design bearings  have an inner ring with three integral flanges and a flangeless outer ring. A retaining ring, inserted in the outer ring between the roller rows, keeps all bearing components together. Axial displacement of the shaft relative to the housing in both directions can be accommodated within the bearing. The bearings are therefore suitable for non-locating bearing positions.

NNC design bearings  are equipped with the same inner ring as bearings of the NNCL and NNCF design. The outer ring is split and held together by retaining elements, which should not be loaded axially. Both parts of the outer ring are identical and carry one integral flange, enabling the bearing to locate the shaft axially in both directions.

NNF design bearings in the NNF 50 and 3194(00) series are always sealed on both sides and filled with grease. The two-piece inner ring has three integral flanges and is held together by a retaining ring. The outer ring has an integral central flange. The bearings can be used to locate a shaft axially in both directions. Because of the large distance between the two rows of rollers, the bearings are also able to accommodate tilting moments.

FAG  Double row full complement cylindrical roller bearings include series of SL0148  SL0149 SL0248 SL0249  SL04..-PP  SL0450..-PP.

Skype/Wechat/Whatsapp:+86-18963592618

Email:perfectbearing@www.perfectbearing.com

FAG transmission bearing are designed to offer a high degree of passenger comfort, generate little noise and be economical. This is made possible, amongst other things, by the rolling bearings developed by Schaeffler Group (FAG bearings)Industrial that can be found in railway transmissions.

FAG transmission bearing consists of Various ball and roller bearing types  mentioned below, further types such as deep groove ball bearings, spherical roller bearings, and angular contact ball bearings are used.

Cylindrical roller bearings

Single-row cylindrical roller bearings offer an advantage over other conventional bearing designs because of how easy they are to dismantle in the inner and outer rings with a roller and cage assembly. This means that the user is offered practical benefits with regards to assembly, dismantling, maintenance and inspection. Cylindrical roller bearings are particularly suitable for transmitting high radial forces. NJ and NUP cylindrical roller bearings can also partly be used for transmitting axial forces. FAG cylindrical roller bearings have a modified linear contact between the rollers and the raceway to prevent edge stresses.

Tapered roller bearings

Tapered roller bearings are can be taken apart, since the inner ring with the roller and cage assembly and the outer ring can be assembled separately. The modified linear contact between the rollers and the raceways prevent edge stresses. Tapered roller bearings can support high radial and axial loads. Since the bearings can only support axial loads in one direction, as well as for supporting internal aligning forces, a second laterally-reversed tapered roller bearing is required for counterstay.

Four-point contact ball bearings

Four-point contact ball bearings are a type of single-row angular contact ball bearing, since they support high axial loads in both directions. Four-point contact ball bearings are usually assembled with cylindrical roller bearings in a loose radial location. Axial minimum loads are required for low friction, especially for high speeds.The inner ring of a four-point contact ball bearing is split, which means it can accommodate a large number of balls.

Skype/Wechat/Whatsapp:+86-18963592618

Email:perfectbearing@www.perfectbearing.com

INA FAG Cylindrical roller bearings consist of Cylindrical roller bearings with cage ,Low-friction cylindrical roller bearings,High precision cylindrical roller bearings,Full complement cylindrical roller bearings,Cylindrical roller bearings with snap ring grooves.

Cylindrical roller bearings with cage(fag bearings),Single row cylindrical roller bearings with cage are units comprising solid inner and outer rings together with cylindrical roller and cage assemblies. The outer rings have rigid ribs on both sides or are without ribs, the inner rings have one or two rigid ribs or are designed without ribs. The cage prevents the cylindrical rollers coming into contact with each other during rolling.

The cylindrical roller bearings are very rigid, can support high radial loads and, due to the cage, are suitable for higher speeds than the full complement designs. Bearings with suffix E have a larger roller set and are thus designed for extremely high load carrying capacity.

The bearings can be taken apart and can therefore be fitted and dismantled more easily. Both bearing rings can therefore have an interference fit.Single row cylindrical roller bearings with cage are available as non-locating, semi-locating and locating bearings.

Low-friction cylindrical roller bearings LSL and ZSL are single row, self-retaining and correspond to dimension series 23. The bearings have solid outer rings with two ribs, while the inner rings have one rib. The inner ring can be removed and this gives easier fitting of the bearings. Disc cages or spacers prevent the cylindrical rollers coming into contact with each other during rolling.

High precision cylindrical roller bearings,Cylindrical roller bearings of this type are double row precision bearings for machine tools. They allow radially rigid, high precision bearing arrangements and are mainly used for the radial support of main spindles.

The bearings comprise solid outer rings without ribs, solid inner rings with three ribs and cylindrical roller and cage assemblies with solid brass cages. For optimum setting of the radial internal clearance, the inner ring has a tapered bore with a taper of 1:12. The cylindrical roller bearings can be dismantled and are therefore easier to fit and remove. Both bearing rings can therefore have an interference fit.

Full complement cylindrical roller bearings have solid inner and outer rings and rib-guided cylindrical rollers. Since these bearings have the largest possible number of rolling elements, they have extremely high radial load carrying capacity, high rigidity and are suitable for particularly compact designs. Due to their kinematic conditions, however, they cannot achieve the high speeds that are possible when using cylindrical roller bearings with cage.Full complement cylindrical roller bearings are available as non-locating, semi-locating and locating bearings and in single and double row designs.Cylindrical roller bearings with snap ring grooves are full complement, self-retaining units comprising solid inner and outer rings, rib-guided cylindrical rollers and sealing rings.

The outer rings have grooves for retaining rings. The inner rings are axially split, 1 mm wider than the outer rings and are held together by a steel strip that is rolled into place.

Locating bearings,Cylindrical roller bearings with snap ring grooves are locating bearings. These bearings are highly rigid and can support axial forces in both directions as well as high radial forces.

Due to the full complement design of these bearings, they have the largest possible number of rolling elements and thus extremely high basic dynamic and static load ratings. Due to their kinematic conditions, however, they cannot achieve the high speeds that are possible when using cylindrical roller bearings with cage.

Due to the grooves in the outer ring, the bearing rings can be axially located with ease. The bearings are therefore very suitable in bearing arrangements for cable sheaves.

We can provide nearly all kinds of INA FAG cylindrical roller bearings in stock,if you are interested in any of them,please comtact us,Looking forward to hearing from you.

Skype/Wechat/Whatsapp:+86-18963592618

Email:perfectbearing@www.perfectbearing.com

Ig you are seeking for discount fag bearings,then I will recommend China BRG bearing to you. China BRG bearing supply most of FAG bearings  in a more discount price.

Below are some FAG bearings at discount price in stock.

FAG Deep Groove Ball Bearings,such as series 6000, 6200, 6300, 6900, 60, 67, 68, R, RA, 1200, 1300, 2200, 2300
Size Range: 10 mm to 500 mm OD. save 30% or more.

FAG Cylindrical Roller Bearings,such as series N, NF, NJ, NN30, NU  Sized from 20 mm inside diameter to 950mm outside diameter. save 40% or more.

FAG Tapered Roller Bearings,sizes from 15 mm inside diameter to 750 mm outside diameter. save 40% immediately

FAG Spherical Roller Bearings ,such as series  21300, 22200, 22300, 23000, 23100, 23200, 23900, 24000, 24100.  inside diameter from 20mm to 700mm when you buy these fag bearings  from us you can save more than 50% or get more discount . 

Fax:+86-635-2319719

Msn:perfect_bearing@hotmail.com

China BRG bearing sells most kinds of lager FAG bearings.such as :

FAG  large Deep groove ball bearings    inner size from 200mm-750mm

FAG  large Angular contact ball bearings   inner size from 150mm-500mm

FAG  large Self-aligning ball bearings   inner size from 200mm-800mm

FAG  large Cylindrical roller bearings   inner size from 150mm-800mm

FAG  large Self-aligning ball bearings   inner size from 200mm-800mm

FAG  large Tapered roller bearings      inner size from 200mm-750mm

FAG  large Spherical roller bearings    inner size from 200mm-850mm

If you are in need of any bearing,please send inquiry to us,we will quote you the best price.cLooking forward to hearing from you.

Fax:+86-635-2319719

Msn:perfect_bearing@hotmail.com

Some of FAG Cylindrical roller bearings NU23..-E Series we could supply:

NU2304-E-TVP2  20 52 21   450pcs in stock
  
NU2305-E-TVP2  25 62 24   360pcs in stock
   
NU2306-E-TVP2  30 72 27   390pcs in stock
   
NU2307-E-TVP2  35 80 31   430pcs in stock
  
NU2308-E-TVP2  40 90 33   560pcs in stock
   
NU2309-E-TVP2  45 100 36  800pcs in stock
  
NU2310-E-TVP2  50 110 40  900pcs in stock
   
NU2311-E-TVP2  55 120 43   300pcs in stock
   
NU2312-E-TVP2  60 130 46   400pcs in stock
  
NU2313-E-TVP2  65 140 48   900pcs in stock
   
NU2314-E-TVP2  70 150 51   700pcs in stock
  
NU2315-E-TVP2  75 160 55   260pcs in stock
   
NU2316-E-TVP2  80 170 58   240pcs in stock
   
NU2317-E-TVP2  85 180 60   240pcs in stock
   
NU2318-E-TVP2  90 190 64   290pcs in stock
   
NU2319-E-TVP2  95 200 67   220pcs in stock
   
NU2320-E-TVP2  100 215 73   160pcs in stock
   
NU2322-E-TVP2  110 240 80   110pcs in stock
   
NU2324-E-M1   120 260 86    110pcs in stock
   
NU2326-E-M1   130 280 93    170pcs in stock
    
NU2328-E-M1   140 300 102   190pcs in stock
   
NU2330-E-M1   150 320 108   120pcs in stock
   
NU2332-E-M1   160 340 114   120pcs in stock
   
NU2334-EX-M1  170 360 120   160pcs in stock
   
NU2336-EX-M1  180 380 126   100pcs in stock
   
NU2338-EX-M1  190 400 132   110pcs in stock
   
NU2340-EX-M1  200 420 138   50pcs in stock
  
NU2344-EX-M1  220 460 145   20pcs in stock
   
NU2348-EX-M1  240 500 155   15pcs in stock
   
NU2352-EX-M1  260 540 165   10pcs in stock
   
NU2356-EX-M1  280 580 175   6pcs in stock

Except for FAG Cylindrical roller bearings NU23..-E Series,we also supply other FAG Cylindrical roller bearings Series in stock.Welcome to send inquiry to us.Looking forward to hearing from you.

Fax:+86-635-2319719

Msn:perfect_bearing@hotmail.com