Aligning needle roller bearings,Combined needle roller bearings and Inner rings. most of the ina needle roller bearings we can surply in stock .

Needle roller bearings with ribs

Needle roller bearings are single or double row units comprising machined outer rings with ribs, needle roller and cage assemblies and removable inner rings. The bearings are available in open and sealed versions.

Needle roller bearings without ribs

Needle roller bearings without ribs are single or double row units comprising machined outer rings without ribs, needle roller and cage assemblies and removable inner rings.

The bearings are not self-retaining. This means that the outer ring, needle roller and cage assembly and inner ring can be fitted independently of each other.

Aligning needle roller bearings

Aligning needle roller bearings are units comprising drawn outer cups, plastic support rings with a concave inner profile, outer rings with a spherical outside surface, needle roller and cage assemblies and removable inner rings.

The bearings can compensate static shaft misalignments and can thus tolerate misalignment of the shaft relative to the housing.

Aligning needle roller bearings are firmly seated in the housing bore. The bore can therefore be produced easily and economically.

Combined needle roller bearings

Combined needle roller bearings are units comprising radial needle roller bearings with a rolling bearing component capable of supporting axial loads.

Inner rings

Inner rings are made from hardened rolling bearing steel and have precision machined or ground raceways.

They are used where:

the shaft cannot be used as a raceway with needle roller and cage assemblies, drawn cup needle roller bearings with open ends, drawn cup needle roller bearings with closed end and needle roller bearings
needle roller bearings must be combined with wider inner rings in order to facilitate axial displacement of the shaft in relation to the housing
optimum running surfaces are required for the seal lips.

Inner rings, precision machined

In inner rings IR, the raceway is precision machined. Chamfers on the end faces allow easy insertion into the bearings and prevent damage to the seal lips of the bearings. The inner rings are available with and without a lubrication hole.

Inner rings, ground

In inner rings LR, the raceway is ground. The end faces are turned and the edges are broken. These rings have larger tolerances than the rings of series IR. They are therefore suitable for applications that permit larger tolerances for width and less demanding requirements for axial runout.

Skype/Wechat/Whatsapp:+86-18963592618

Email: perfectbearing@perfectbearing.com